10 Things We All Hate About Upvc Window Replacement Hinges
From Dark Warriors Wiki
Choosing Upvc Window Replacement Hinges
It's not as difficult as it could appear to select and install the replacement hinges made of upvc. Make sure the arrows on the hinges are facing the correct direction and measure the thickness of the hinge arms on the frame opening (13mm or17mm).
There are many different kinds of hinges that you can pick from, each with distinct features. This article will focus on the most commonly used kinds of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great option to replace hinges on upvc window or upgrade the fire escape safety window because they can be opened at a 90-degree angle. They can be disengaged in an easy-cleaning position, allowing you to access the outside of windows without having to climb ladders or lean at dangerous angles.
These heavy duty egress hinges are made by Yale, one of the most known and reliable home security brands on the market today. They are suitable for all kinds of uPVC side-hung windows. By pressing a small button the window sash is moved to the side and then into the clean position. Once closed, the sash will automatically return to its original position.
They are available in both 13mm and 17mm stack heights. Use our Egress Selection Guide to help you determine the best product for your window.
These hinges can be fitted to conventional side-hung frames made of uPVC, or aluminium window hinges. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the risk of a mishap during severe winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
The Nico Egress Easy Clean friction hinge is easy to operate and does not have buttons or catch. It provides a convenient and secure solution to emergency exit and cleaning. Use the hinge retention clip located in the inner corner of the bottom corner. This will release both the bottom and top catches allowing you slide the sash to the clean position. Close the window once you are in the easy-cleaning position. This will set the hinges back to their Egress positions.
Fire-Escape Hinge
Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side-opening windows for escape (fire safety) reasons. These types of hinges are more spacious and more efficient than normal hinges, allowing a large clear opening for escape in the event of an incident of fire. This type of hinge is a legal requirement in any habitable room that has windows, as required by building regulations.
They have an exclusive friction stay that allows the window to open at an angle of 90 degrees. It also allows the opening sash to slide across when open for easy cleaning of the outside of the glass, without having to climb ladders. The hinges have no fiddly buttons or catches, and are operated with an easy, secure lever that is accessible from the inside of the home.
The hinges are manufactured in the UK by Cotswold and come with a child safety restrictor for day to day use that can be overridden with a hidden button providing you with peace of mind that your children won't accidentally open the window too far. They are available in 13mm and 17mm stack heights.
To order these hinges simply measure the length of your current side-hung window hinge which fixes to the frame (see the guide on measuring your upvc window hinges). Then, select the appropriate size hinge from the choices below.
Note that this measurement is taken at the hinge's part that connects to the frame, not the sash. The actual length of the hinge may be shorter or longer dependent on how to measure window hinges the windows were made in the past. Also, when choosing the width of your hinge most upvc Window hinge windows will fit a 13mm stack height. However, should your old frame have 17mm then choose the option that fits this. Alternatively you can fit the 4mm packer to make up for the difference. All hinges are supplied in pairs (1 left and one right). The hinges do not come with screws. They can be purchased separately if needed. Our window hinge broken repair screws made of upvc are highly recommended. They are specifically designed to improve the performance of your hinges and allow them to function efficiently for a longer. They feature a less friction design and a better weather seal with a new nylon reducer cap.
Restricted Hinge
There are instances when a window needs to fully open and this can be difficult using a standard hinge. The restricted child safety friction hinges are a solution to this problem and provide a solution when ventilation is required but access to clean up or escape in the event of fire is not feasible. They work by restricting the amount the sash can open and allow the control of this limitation with a button. They are suitable for both side and top-hung windows and come in 13mm and 17mm stack heights.
The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor and a fire escape pivot to provide a simple and effective way to comply with building regulations. It is available in 13mm or 17mm stack heights and can be used on both side and top opening uPVC window. It is supplied as a pair of hinges where one hinge is the restricted egress and the other free, allowing one to be fitted on the bottom of the sash while the other is attached to the top.
These uPVC restricting hinges have been tested to BS6375, part 2 and are designed to be used on windows that isn't able to be fully opened, like a small child's bedroom. The mechanism restricts the distance the sash can open to an appropriate height of 100mm, and re-engages once the window is closed.
These uPVC friction-style hinges can be used with any type of windows. They are particularly useful for windows that are hard to reach, like those in three-storey apartments or those that require a ladder. They can be improved with our range security enhancements, like hinge guard protection plate or dog bolts, to achieve PAS 24 performance.
When replacing a window hinge it is crucial to determine the length of the current hinge so you can order replacements that match in size. The most efficient method to do this is to look at the hinge in the image gallery and determining the location you would like it to be positioned. Top hung hinges can be restricted to both sides and side hung hinges can only be used to one side.
Standard Hinge
A standard hinge has metal-to-metal contacts and has no additional parts to reduce friction. It is available in a variety of finishes and also has a fire rating. To quickly determine the radius of hinges, lay it out flat and align a quarter dime in two corners. If the quarter is more snug than the corner, then it should be round to 5/8 inches.
The right hinge can determine the success or failure of your door's appearance. It's important to match the finish and style of your door with the hinges to create a unified look that's both practical and visually attractive.
